Factory Direct arched gold bathroom vanity wall mirror China Supplier - Bulk Supply and Specification Guide
The build method decides how closely an arched mirror in the first production lot will match the next one. Glass is cut to the approved outline, its edges are polished, and a reflective silver layer and protective backing are applied; the metal frame is formed and finished separately before assembly. For distributors and retail buyers working to a launch date, approval of the dimensions, frame profile, gold tone and packing method before production helps prevent late revisions and avoidable freight delays.
How to Choose Before Requesting a Quote
For vanity installations, the arch height, overall width and mounting position need to suit the wall and basin below. Choose those dimensions first; then settle the frame material and finish. A formed aluminum profile keeps frame weight down, while a steel profile can give a more substantial edge but adds weight and may need more attention to corrosion protection in a damp room.
- Start with the finished mirror dimensions and outline.
- If the mirror must align with a standard vanity width, specify the outside frame dimensions and the clear glass area separately.
- If the arch profile is a defining part of the range, provide a dimensioned drawing or approve a physical sample before the production run.
- Select the frame and gold finish against the intended retail price.
- An aluminum profile generally reduces shipping weight; a steel option can change the edge appearance and feel, with added weight and finish-control requirements.
- A brushed gold look and a smoother, brighter gold look can read differently under bathroom lighting. Approve a finish sample under the lighting conditions used for product review.
- Confirm mounting hardware, carton protection and destination requirements before the quote is finalized. These choices affect both the packed dimensions and the ship-ready date.
Quote against an approved drawing and finish sample where possible. A change to the arch radius, frame width or gold tone after sample approval can require new tooling or a new finish setup, which can move the production schedule.
How Consistency Is Held Across Batches
Consistency is set at the forming stage: the same approved outline, arch dimensions and frame profile must carry through cutting and assembly. A small width or crown-height drift can make adjacent mirrors look mismatched on a retail display; a weight change can also affect carton planning and handling. The reference sample and drawing should therefore define the points used for inspection, rather than relying on visual judgement alone.
At incoming and in-process checks, the factory can compare overall dimensions, glass thickness, frame dimensions, unit weight and finish appearance against the approved specification. Edge chips, reflective-layer blemishes, frame gaps and inconsistent gold tone need review before packing. For bathroom use, inspect the protective backing and frame finish as well as the front appearance; moisture exposure can reveal weak points that a dry showroom check will not.
| Buyer check | Common specification choices | Planning range or comparison | Durability and batch-control point |
|---|---|---|---|
| Compact vanity size | About 500 × 700 mm; 3–4 mm mirror glass, subject to design | Approx. 4–6 kg per unit before packaging, depending on frame and hardware | Check width, height, arch profile and finished weight against the signed sample. Smaller glass area does not remove the need for edge protection. |
| Mid-size vanity mirror | About 600 × 900 mm; glass thickness selected for the dimensions and mounting design | Approx. 5–8 kg per unit before packaging; final weight depends on frame profile and fittings | Record unit weight by production lot. Drift may change freight calculations and can signal a material or assembly change. |
| Large wall format | About 700 × 1000 mm or a buyer-specific size; 4–5 mm glass may be considered based on the design | Approx. 7–10 kg per unit before packaging; confirm by approved sample | Review mounting points, frame rigidity and carton protection for the final dimensions. Larger glass can raise breakage exposure in transit. |
| Glass edge and backing | Polished edge; reflective coating with protective backing | Confirm edge treatment and backing construction for the selected glass | Inspect edges for chips and backing for exposed or damaged areas. Keep cleaning chemicals away from exposed edges unless the supplier confirms compatibility. |
| Gold frame finish | Gold-finished aluminum or steel profile; appearance depends on the selected finish process | Approve the finish sample and reference colour before bulk production | Compare tone, sheen and visible surface marks across the lot. Keep the same material and finish specification for repeat orders to limit colour drift. |
Dimensions and weights above are planning ranges, not a substitute for a product drawing. Final values depend on the arch shape, glass thickness, frame section, mounting fittings and packaging configuration.
Keeping Repeat Orders Supplied
Process choice shows up later as either a controlled reorder or a new approval cycle. Retaining the approved drawing, sample, finish reference and packing specification gives the factory a clear baseline for subsequent lots. If the frame material, supplier finish, glass thickness or hardware changes, request a revised sample review before the change enters production.
Stock availability depends on the selected size, frame finish and order quantity. Standard components may be easier to schedule than a non-standard arch profile or a gold tone produced for one buyer. For a fixed retail launch date, ask for confirmation of material availability, sample approval timing, production capacity and the planned ship window together; a ready component does not by itself confirm a finished order is ready to dispatch.
Packing, Marking and Freight Configuration
Transit damage often starts at the glass edge or where the frame can move inside the carton. Carton design should fit the finished mirror, protect the arch and corners, and prevent contact between units if more than one mirror shares an outer pack.
- Confirm whether units ship in individual cartons, a master carton or palletized loads; the choice affects handling, cube and freight cost.
- Agree on carton marks, SKU, quantity, country-of-origin marking and any retailer barcode or shipping-label placement before packing starts.
- Request a packing review for the final size and freight route. Larger mirrors need particular attention to edge protection and restraint against movement.
Keep the approved carton specification with the product record. A carton change can affect both the damage rate and the number of units that fit each pallet or container.
Questions Buyers Ask Before Ordering
Can the factory hold the same arch shape on a repeat order? Yes, when the approved drawing and sample remain the reference and the same forming and assembly specifications are used. Confirm any material or process substitution before production, since it can affect the outline or frame fit.
How should we compare gold finishes before choosing one? Review physical finish samples under similar lighting and against the intended bathroom fittings. Record the selected tone and sheen as the reference for the bulk lot and future replenishment.
What determines the minimum order and lead time? Size, frame material, finish setup, quantity and packing requirements all affect the production plan. Ask for the sample approval date, material status and dispatch estimate in the same schedule review, especially when the order supports a fixed launch.
What files are needed for retail branding and carton artwork? Provide the approved logo artwork, label or barcode information, carton-mark requirements and placement instructions. Review a digital proof before printing, then keep the approved proof with the order specification.
Can mirrors of different sizes share one shipment? Often, subject to carton dimensions, pallet stability and the destination’s handling requirements. Confirm the mixed-SKU packing plan and carton counts before the freight booking.
Review the artwork and product details before the order is released. Send the target dimensions, finish reference, logo files and carton-mark requirements for a specification and branding review.
Contact the factory team to review your mirror specification and artwork