Wholesale gold oval bathroom vanity mirror Suppliers - Bulk Supply and Specification Guide

Size, Weight and Specification Range

Wall-hung vanity mirrors are commonly specified by overall width and height, glass thickness, frame depth and mounting orientation. Oval models often fall around 400–600 mm wide and 600–900 mm high; the final range depends on the retail assortment and wall-space requirement.

A 3–5 mm mirror glass option is typical for this product family. Finished weight may sit roughly between 4 and 12 kg across common sizes, but glass area, frame section and mounting hardware all affect the packed and installed load. Use the approved production drawing for dimensional tolerances rather than relying on a catalogue image.

Assumptions Buyers Should Stop Making

Before comparing quotations, check whether each supplier has priced the same frame material, gold finish route, glass thickness and carton protection. A line that says “gold oval mirror” does not define the reflected image, edge treatment or hanging method.

A gold sample viewed under warm showroom lighting may look different under neutral factory lighting. Agree on a physical finish reference and the viewing conditions for inspection. Also confirm whether the quoted weight is net product weight or includes mounting parts and protective packaging.

Unit price settles the question only after the specification and inspection basis match. If a cheaper frame finish wears at the edges or mirror backing damage appears after transit, the initial saving can be outweighed by replacements, returns and service handling.

What Can Be Customised and What Cannot

A private-label project can usually retain the existing frame profile while changing dimensions, finish tone, hardware and packaging. A new oval profile or frame section changes setup and sampling requirements, so confirm the drawing and approval route before the production schedule is set.

Choose the Specification Route

1. If the current oval profile already matches the range, keep the frame tooling and specify glass size, finish reference and mounting position.
   1. For repeat orders, reference the approved drawing and retained finish sample.
   2. For a new size, request a dimensional sample before artwork and cartons are finalized.
2. If the gold tone is the main difference, keep the construction fixed and approve a physical finish sample before bulk production. A change in finish route may alter appearance and cost.
3. If the oval contour or frame depth must change, treat it as a tooling and engineering change. Confirm sample charges, lead time and the point at which drawing changes stop.

Mirror glass, frame and backing are assembled as a unit, so a finish change does not correct a glass distortion or backing defect. Keep those acceptance points separate in the specification.

Requirements by Buyer Segment

Brand product managers need the approved profile, finish and hardware to remain stable across colorways and reorder lots. Retain a signed sample or controlled reference, and require the supplier to identify material or process substitutions before production.

Private-Label Release Checks

• For buyers matching an existing SKU, attach the latest drawing revision, approved gold sample and packaging layout to the purchase order.
• For a retail-ready program, confirm brand marks, warning or installation copy, barcode position and carton identification before print approval.
• For a range with multiple mirror sizes, define the same inspection method across each size and identify any size-specific mounting hardware.

Consistency has a service value: a replacement should fit the same mounting plan and look like the original finish. Record the approved reference and batch details so a warranty case can be traced to the production lot rather than judged from photographs alone.

What Gets Checked Before Shipment

Customer complaints often point to chipped glass edges, a visible wave in the reflection, uneven gold tone or damage at the frame joint. Shipment checks should use the approved sample and drawing as the comparison basis, not an informal visual judgment.

• Measure overall width, height and frame depth against the approved drawing; check the oval contour at the specified reference points.
• Inspect the reflected image under controlled viewing conditions for visible distortion, marks or defects in the viewing area.
• Compare gold finish tone and sheen with the retained sample, including frame edges, corners and joints.
• Check glass edges, backing coverage, frame joints, hanging hardware and fastener fit before the unit is packed.
• Review the packed sample for movement inside the carton and confirm that protective pieces do not press directly on the glass.

Volume Planning and Lead Time

Production timing depends on frame material, finish capacity, glass availability, packaging approval and order quantity. A repeat specification with approved components can move faster than a new oval profile or a finish that needs a separate sample cycle.

Request a schedule that separates sample approval, material preparation, assembly, inspection and export packing. Confirm the order quantity at each size and finish; mixed configurations can affect minimums and production sequencing.

For total cost planning, compare the landed unit cost with the expected cost of breakage, finish mismatch, returns and replacement shipments. A slightly higher unit price can be the lower-cost choice if it includes better batch control and packaging suited to the route.