Specifying Wholesale gold spoked sunburst wall accent mirrors China Factory for Wholesale and OEM Orders
Consistency is set at the forming stage. Spokes need even spacing and a secure connection to the centre hub; after that, the frame receives its gold finish and the mirror is fitted. For wholesale orders, decisions made at these steps affect the symmetry buyers see on the wall, the handling feel at installation, and the number of units that arrive ready for retail sale.
How It Performs in Use
A sunburst mirror is judged first by its face-on appearance, then by how it holds up through handling, hanging, and routine dusting. Uneven spoke angles are easy to spot against a wall, while a loose hub or poorly secured mirror can create movement that feels cheap to the customer. Larger diameters also put more leverage on the hanger and frame, so wall-fixing details should match the finished size and weight.
Gold tone can vary with the selected coating and base metal. A plated finish tends to cost more than a painted finish, while paint offers more flexibility on colour and can simplify matching across a broader decor range. Buyers should approve a physical finish sample against the intended retail lighting; photographs alone can make warm and pale gold tones look similar.
Construction Method and Its Effect on Consistency
First-article tooling determines the spoke pitch and the relationship between the hub, mirror, and outer profile. Confirm the assembled outline and hanging point on the approved sample before a production run; changing the spoke layout after tooling approval can affect both appearance and packing dimensions.
For common designs, the mirror glass is cut to size and its exposed edge is ground before fitting. Steel spokes may be stamped from strip or formed from wire, then fixed to a hub by welding or mechanical attachment. A welded assembly gives a firm frame, but heat and finishing sequence need control so joints do not show through the gold coating. Mechanical fixing can ease some repairs, though visible fasteners may affect the intended look.
Process choice shows up later as finish wear, spoke alignment, and serviceability. A scratch on a coated spoke may expose the base metal; buyers who expect frequent handling should weigh a more protective finish against the added unit cost. Where replacement of the mirror is a priority, specify how the glass is retained and whether a service technician can remove it without bending the spokes.
Specification Range and Customisation Limits
| Parameter | Typical working range | Buyer consideration |
|---|---|---|
| Overall diameter | About 40–100 cm, subject to design | Larger styles need suitable wall hardware and more protective carton space. |
| Mirror diameter | About 15–30 cm, depending on the sunburst proportion | Confirm the glass-to-frame ratio on a sample; a small glass face changes the product’s practical mirror use. |
| Spoke material and section | Formed steel wire or strip; section selected to suit the span | Thicker sections can reduce flex but add weight and material cost. |
| Finished unit weight | Often about 1.5–5 kg across these sizes | Final weight depends on glass size, frame construction, and hardware; use the approved sample for carton and listing data. |
| Gold finish | Painted or plated finish, subject to material and design | Set the approved colour reference and finish type before repeat orders. |
These are planning ranges rather than fixed catalogue dimensions. Spoke count, hub shape, mirror size, and finish can be tailored, but each change may alter unit weight, tooling needs, carton layout, or the number of units per export carton. Ask the factory to confirm the final drawing and packed dimensions before cost approval.
Who Uses It and Where It Matters
Home Décor Retail
Retail buyers choose wall accents for coordinated room collections. Repeatable gold tone and stable spoke spacing help a replenishment order match the original shelf presentation.
Interior Projects
Furnishers and project buyers use these mirrors in bedrooms, entryways, and lounge areas. Wall type, fixing position, and the clearance around projecting spokes matter at installation.
Online Home-Goods Sellers
E-commerce sellers need the finished and packed measurements for accurate listings. A projecting frame can be vulnerable to carton pressure, so the pack design should protect the spokes as well as the glass face.
- For entryways with frequent handling during cleaning, specify a smooth spoke finish and packaging that prevents metal-to-glass contact in transit.
- For bedroom and living-room collections, approve the mirror scale and gold tone beside the other pieces in the range, not from a product image alone.
- For online orders, account for the outside carton size and the protrusion of the spokes when planning parcel handling and storage.
Requirements by Buyer Segment
Private-Label Buyers
A private-label programme benefits from a locked drawing, finish sample, packaging artwork, and product label. These controls reduce avoidable variation between the first order and reorders. Cost savings should be measured against sellable units: a lower piece price has little value if carton damage or finish mismatch leads to returns.
Retail Buyers
Retail buyers need a clear assortment decision: size, gold shade, and carton quantity should suit the price tier and shelf plan. A simpler finish or fewer custom details can lower cost, while a distinctive spoke profile may support a stronger range identity. Confirm barcode and carton-mark requirements before production.
Club or Academy Purchasing Managers
For shared accommodation or reception spaces, practical mounting and easy surface care take priority over intricate finish details. Specify the installation surface and intended location so the supplied hanger and fixing guidance suit the site conditions.
Across all buyer types, the approved sample should represent the actual production finish and construction. A change in spoke section, mirror diameter, or coating after approval can change cost and appearance; document any revision before placing a repeat order.
OEM and ODM Programme Structure
OEM orders usually start from a buyer’s approved drawing, finish, and packaging brief. ODM work can begin with a factory design or reference style, then move through proportion review, sample approval, and final specification sign-off. Either route should settle the hanger position, glass retention, gold finish reference, label placement, and export packing before bulk production.
| Programme item | Indicative planning range | What changes the schedule or quantity |
|---|---|---|
| Initial order MOQ | Often 100–300 units per design | Custom tooling, finish, packaging, and order mix affect the minimum. |
| Sample development | Commonly 7–14 days after details are confirmed | New tooling or finish matching may add time. |
| Bulk production | Commonly 30–45 days after sample and order approval | Seasonal capacity, quantity, component availability, and packaging artwork affect the confirmed lead time. |
These figures are planning references, not a production commitment. The final quotation should state sample charges, tooling ownership where relevant, approved specifications, packing method, MOQ basis, and the production schedule. For a quotation review, send the target size, reference images or drawing, finish preference, order quantity, and destination market through our contact page.
A useful quotation compares like with like: same diameter, spoke layout, glass size, gold finish, hanger, retail pack, and export carton. That lets buyers judge landed cost per sellable unit instead of comparing piece prices that cover different specifications.